Loading... Please wait...

Hover over image to zoom

  • Image 1
  • Image 2
Raw Brokerage

Raw Brokerage Pro Built Cylinder Head Stage 2 - RB26DETT

Contact us for pricing

 Product Description

Raw Brokerage Pro Built Cylinder Head Stage 2 - RB26DETT

The Raw Brokerage stage 2 RB26 cylinder head is a definite upgrade from factory components and provides much better air flow and reliability for the higher HP applications. This setup is typically good for making 600whp+ in turbo applications. The combination of the Raw Brokerage street port and polish make this head truly stand out from the typical upgrades found elsewhere. This head is suitable for high lift camshafts. To do so, we clearance the cylinder head for the camshafts.  *If choosing to run hi-lift cams the standard lifter buckets will have to be replaced with Supertech Lifter Buckets and shim to compensate the smaller base circle camshafts used.

Requires you to send in your complete cylinder head for this service.

Cylinder Head

Parts included:
Supertech Standard Size Intake Valves (Stainless Steel)
Supertech Standard Size Exhaust Valves (Inconel)
Supertech Dual Valve Spring Kit (92 lbs)
Supertech Titainum Retainers
Supertech Bronze Valve Guides (Intake & Exhaust)
- Supertech Valve Stem Seals
*Does not include camshafts, however when purchased with a built head installation is included*  
Machine work includes:
- Clean and inspection of oil ports
- Competition 3 angle valve job
- Street Port and Polish
- Resurfacing of head
If requiring us to get the solid lifter lash within tolorance, we will require your camshafts, lifters, and shims (if they're removed ALL components must be properly labeled/numbered). 

 Find Similar Products by Category

Vendors Other Products

 Product Reviews

Write review

This product hasn't received any reviews yet. Be the first to review this product!





Click the button below to add the Raw Brokerage Pro Built Cylinder Head Stage 2 - RB26DETT to your wish list.