Loading... Please wait...

Hover over image to zoom

  • Image 1
Adaptronic

Adaptronic Plug-In Modular EMS for Nissan RB20 RB25 RB26

$1,350.00

 Product Description

  • Modular system, so that people can buy hardware upgrades later as their needs develop (eg additional inputs, outputs, or specific functions, eg drive by wire or built-in lambda)
  • Wireless communication
  • Has direct fire ignition and fully sequential injection
  • Supports other outputs like dual speed fuel pump and variable TPS output for the 4WD control or the ALSD on the R33 GTST
  • Maximum output of 22 (8 ignition, 8 injector, 4 auxiliary, tacho and fuel pump)
  • Excellent trigger tracking of the Nissan cam angle sensors
  • Has interactive pinout page as well as telling you which pin does what
  • Fast USB communication, requiring no drivers
  • Headphone port for listening to the knock sensor while tuning
  • 4 x serial in ports
  • 1 x CAN port
  • Power over USB to do loading of maps, firmware etc without having to provide it with 12V power
  • 32MB of onboard logging to flash
  • Exception logging, able to detect faults and log a bunch of things that happen around the same time to help with ECU setup and tech support
  • Very easy to change injectors without rescaling the map
  • Bigger maps, more of them, and more dedicated maps.

 

 

 

Variable Number Details

 

Analogue 0-5V inputs

11

 

Each is 0 – 5.5V, 55k input impedance

  • 2 x TPS / pedal position
  • 6 x pressure – Oil, Fuel, Internal intake MAP, internal exhaust MAP, external intake MAP, external exhaust MAP
  • 3 x spare for servo feedback / external inputs

 

Analogue oxygen sensor inputs

2

 

Each can be either:

  • 0 – 5.5V, 55k input impedance
  • 0- 3.3V, 1M input impedance

 

Temperature inputs

4

 

Each is 0 – 5.5V, 55k input impedance to ground

Each can be:

  • Non-biased, eg in piggyback mode. Calibration is in mV
  • Biased, calibration is in Ohms. 3 internal pull-ups, 1k5, 2k2, 4k7, automatically selected by the ECU

Manifold air temperature, coolant temperature, oil temperature, fuel temperature

 

Crank trigger inputs

3

 

  • Selectable 2k2 pullup (on in digital mode, off in reluctor mode)
  • Variable voltage trigger threshold from 0 to 65V – either arm input for reluctor or threshold for digital input
  • AC coupled zero crossing trigger in reluctor mode
  • Variable filtering 1 to 192 µs
  • See built-in scope section

 

Vehicle speed input

1

 

  • Selectable 2k2 pullup
  • Variable voltage trigger threshold from 0 to 65V
  • Variable filtering 1 to 192 µs
  • See built-in scope section

 

Sensor power and ground

 

 

 

 

  • 5V regulated output for sensors, max 100 mA, current limited (voltage is monitored by ECU)
  • Sensor ground connected to ground inside ECU under firmware control to detect external ground loops in the wiring (voltage is monitored by ECU)

 

Knock inputs

1

 

  • 50 k input impedance
  • Sampled at 80 kHz (12-bit resolution, 3.3V peak to peak max voltage),
  • Variable second order highpass and lowpass filters
  • Selectable start and end of sampling windows (in crank angle)

 

Wired Outputs

2

 

  • Dedicated outputs for tacho and EFI relay
  • Tacho output has inductor to generate back-EMF spike for impulse tachometers.
  • EFI relay output can be configured as fuel pump or EFI relay. Switches to ground, current limited to 600 mA

 

Headphone output

1

 

Mono output, can be selected as direct knock input or filtered knock input

 

 

  

Power sources

3

 

ECU can be powered by 12V EFI input, ignition switch, or USB (USB for settings / firmware upgrades / log retrieval only; 12V must be applied to read inputs)

 Find Similar Products by Category

Vendors Other Products

 Product Reviews

Write review

This product hasn't received any reviews yet. Be the first to review this product!

Shipping:
Calculated at checkout

Categories

News

newsletter

Click the button below to add the Adaptronic Plug-In Modular EMS for Nissan RB20 RB25 RB26 to your wish list.