Injector Dynamics, the founders of "Dynamic Characterization" batch test a large number of injectors to carefully match them into sets based on their dynamic flow across the pulsewidth range. This offers superior cylinder consistancy which results in a smoother, better running engine that is easier to tune, and more daily-driver-friendly.

* The ID1000 was the first injector offered with full dynamic characterization providing tuners with the data they needed to do their job properly.
* The ID1000 was the first injector to be offered in dead time matched sets.
* The ID1000 was the first high impedance high flow injector available providing stock idle and drivability on engines as small as 325cc per cylinder.
* The ID1000 was the first injector offered with the now famous "Top Hat Adapter" making it plug and play in nearly any application.
* With a maximum pressure capability of 7 bar and excellent low pulsewidth extension, this is a versatile injector that will be at home in many different applications.
* From high power high boost daily drivers, to NHRA Pro Stock Motorcycles and record setting turbo road race sedans, the ID1000 set the standard and marked the beginning of a new era in fuel injector performance.
* Nominal Dynamic Flow Rate - 1000cc/min @ 3.0 Bar (43.5 psi) Using Gasoline at 52 Degrees C (125 Degrees F)
* Fuel Compatibility - Compatible With All Known Fuels

NOTE: Will not fit the factory 10.5mm fuel rails. These injectors require a 11mm fuel rail. If you have a 14mm rail, please let us know and we'll be able to have the proper adaptors included with your injectors (see options below)