Haltech Platinum PRO Plug-in ECU for Mitsubishi EVO 9 MIVEC Kit & EVO 8 MR (6-spd)

This fully programmable Plug and Play product opens the door to virtually limitless performance modification and tuning of your vehicle. Programmable systems allow you to extract all the performance from your engine by delivering precisely the required amount of fuel and ignition timing that your engine requires for maximum output under all operating conditions.

Features:
• Direct plug and play replacement of the OEM ECU, no re-wiring necessary.
• Uses the cars factory sensors
• Supports Sequential Injection (peak and hold) and Direct fire ignition
• Windows 2000, XP, Vista, Windows 7 compatible software
• Real time programming, instant hesitation free adjustment while engine is running
• Fully user definable 32 x 32 mapping
• Tuning via Volumetric Efficiency (VE), Injection time or Lambda Correction (MAF)
• Diagnostic Trouble Code Storing & Check Engine Light Control
(Access through laptop only )

• Selectable onboard internal MAP sensor rated to 150kPa (up to 1.5 Bar or 22psi boost)
• Wideband “auto tuning” using user definable target AFR table
• USB and CAN Communication Port

Factory Outputs:
• 4 x Fuel Injector outputs
• 2 x Ignition outputs
• Tacho , MIVEC Control, Boost Control, Intercooler Sprayer,Idle Control,
• Thermo Fan (variable speed), Fuel Pump (variable speed)
• A/C Clutch Relay, Check Engine Light

Factory Inputs:
• MAF Sensor, Throttle Position Sensor, Knock Detection Sensor
• Oxygen Sensors, Coolant Temperature Sensor, Vehicle Speed Sensor
• Air Temperature Sensor, MAP Sensor (JDM and USA Only),
• Power Steering Switch

Expansion I/O*:
• 2 x Analogue Voltage inputs
• 2 x Analogue Temperature inputs
• 4 x Digital pulsed outputs

*Optional auxiliary harness required to be purchased Haltech Part # HT040003

Functions:
• Knock Control
• Long Term Fuel Trim
• ACF On – Base Tables
• Closed Loop O2 Control
• Decel Cut
• Over Boost
• Closed & Open Loop Boost Control
• Gear Setup
• Transient Throttle Enhance

Correction Tables: Fuel Ignition Boost:
• Cranking
• Air Temp Target Correction
• Coolant Temperature Correction
• Map Correction
• Zero Throttle Gear Correction
• Cylinder Trim
• TPS Correction
• Generic Correction 1*
• Generic Correction 2*
• Gear Correction
• Post Start
• Air Temp Duty Correction
• Post Start

* Generic Correction tables have user definable axis

Miscellaneous:
• Data Logging: 448Kb of onboard data logging, Storage for approx 40 minutes at 10 logs per seconds, 6 channels of data
• Max 20 channels logging capability
• Tune can be password protected in software
• Rugged anodized aluminum casing

Power Requirements:
Source: 8.6 to 16.5 Volts DC
Consumption: 530mA @ 12Volts DC

Applications: Mitsubishi Evolution 9 / Mitsubishi Evolution 8 MR 2004 – 2007 Engine Codes:
4G63 Transmission: Manual Only (Automatic not supported) Not Supported: Immobiliser

The Platinum Pro Plug-in Mitsubishi EVO 9 Kit includes:
Pro Plug-in ECU, USB Cable, Programming Software CD, Quick Start Guide, Instruction Manual (on CD)